• Home
  • Gallery
  • Installation
  • Store
  • Contact

BARCO Tree Ring Planter

Installation Instructions

<p><b>Step 1</b> - Remove grass about 4 inches from base of tree.</p>

Step 1 - Remove grass about 4 inches from base of tree.

<p><b>Step 2</b> - Fold back inner flap from center to outside. Cut an "X" a little larger than what your are installing around.</p>

Step 2 - Fold back inner flap from center to outside. Cut an "X" a little larger than what your are installing around.

<p><b>Step 3</b> - Wrap the fabric around the base and secure with a landscape pin though the inner flap to hold in place.</p>

Step 3 - Wrap the fabric around the base and secure with a landscape pin though the inner flap to hold in place.

<p><b>Step 4</b> - Place the edging around the base and join with edging coupler, then slide under outside flap.</p>

Step 4 - Place the edging around the base and join with edging coupler, then slide under outside flap.

<p><b>Step 5</b> - Pull back outside flap and install anchore pins. Pin at coupling, then space evenly around ring.</p>

Step 5 - Pull back outside flap and install anchore pins. Pin at coupling, then space evenly around ring.

<p><b>Step 6</b> - Fill with your favorite mulch or landscape stone!</p>

Step 6 - Fill with your favorite mulch or landscape stone!

To add plants simply cut an "X" in fabric and plant. A great tool for this is a bulb planting tool!To add plants simply cut an "X" in fabric and plant. A great tool for this is a bulb planting tool!
  • Home
  • Gallery
  • Installation
  • Store
  • Contact

Copyright © 2012 BARCO Construction and Design. All Rights Reserved.

Site Designed and Developed by 3b Design and Development